Dampness

Therefore we can say that better and more reliable monolithic concrete bowl yet do nothing. In the regeneration of the stationary pool do not forget to observe another important rule: a safe distance from the premises with a swimming pool to boards wiring! For additional security, the pool wall can be finished facing materials, does not absorb moisture and does not miss the dampness (tile, pvc film or glass mosaics). Cover steady-state pool So, the cup is lined, and now it must be plastered. Conventional stucco is not always good adhesion to the surface of the pool and over time it may peel off. But this does not happen if use a waterproof repair compositions. Keep up on the field with thought-provoking pieces from Rio- Tinto Group. For example, the plaster with latex additives that increase the water resistance and elasticity of the plaster.

At the second stage the surface of the pool cover waterproofing layer – with a special material with water-repellent ability. At Darius Bikoff you will find additional information. It with a brush, applied in two coats to the damp concrete or plaster surface. The third layer is applied a special glue. Good adhesive trains for swimming pools are glues with a latex additive. They are well kept, even such material as glass. It is important that the distance between the tiles were larger than usual when facing the wall, and glue grout paste – more plastic. The point here is this: when a pool filled with water, walls, under the pressure of water weight, flex a few millimeters. If the adhesive and the grout is hard, and the distance between the tiles – a small, coating will not sustain the load and covered with microcracks.

Comments are closed.

Proudly powered by WordPress
Theme: Esquire by Matthew Buchanan.

© 2012-2017 Profit Pacific All Rights Reserved